Have you ever wondered what does a lens hood do or what is the purpose of a lens hood?\u00a0I\u2019ve seen so many photographers using their cameras without using lens hoods and I don\u2019t understand why, because a lens hood is essential and they're very cheap. So I'm answering all the questions you may have about lens hoods to encourage you to start using yours.\r\nWhen you buy a lens most of the time a lens hood comes with it, but if you didn't receive a lens hood with your lens, read on to find out what type of lens hood you should get.\r\nBut before we get to that, we'll answer these questions:\r\n\r\nWhat is the purpose of a lens hood?\r\nWhy do you need a lens hood?\r\nWhat does a lens hood do?\r\n\r\nBy the end of this post you'll understand why you really need one ...PLUS the one time it's actually better not to use a lens hood.\r\nThen we'll look at:\r\n\r\nTypes of lens hoods\r\nWhich lens hood is better\r\nHow to store a lens hood\r\n\r\nPS: \u00a0This post contains affiliate links. Buying something through one of the links won't cost you anything extra, but we may get a small commission.\r\nWhat is the purpose a lens hood?\r\nThere are just two reasons why you need a lens hood:\r\n\r\nTo prevent light hitting the front of your lens\r\nTo protect your lens\r\n\r\nOnly two reasons, but let's find out why they're important...\r\n1. A lens hood prevents light hitting the front of your lens\r\nPutting a lens hood on a lens is the same as raising your hand to shield your eyes from the sun. Because the sun is no longer hitting your eyes, you can see better.\r\nWell, with a lens hood, because the sun is no longer hitting the front of your lens:\r\n\r\ncolors will be more saturated\r\nthere'll be more contrast in the photo\r\nyou'll cut out, or at least reduce, unwanted lens flare\r\n\r\nI know lens flare is really popular at the moment, but not all lens flare works and you don't always want it. Sometimes lens flare just washes out a photo and trying to fix a cloudy photo with the wrong kind of lens flare is time consuming, so best avoided.\r\nBesides, if a washed out photo is not the look you want, using a lens hood is the best way to avoid it.\r\n\r\nIn this instance the lens flare works to highlight the early morning light and feeling of dawn. You can see the two small circles of light to the left of the image. This was taken with a lens hood attached and just a touch of light hitting the front of the lens. Without one the excessive light on the lens would have ruined the shot.\r\n2. A lens hood will protect your lens\r\nThis is the less obvious reason for why you need a lens hood, but it's the reason that I always always always use a lens hood. It protects my lens from:\r\n\r\nrain drops\r\nfinger marks\r\nbumps and scratches\r\n\r\nIn fact, using a lens hood such a habit that I wouldn't consider lifting my camera to my eye without it, even if the sun was behind me with no possibility of it hitting the front of my lens. In my more dappy moments I\u2019ve been known to fit my lens hood, but forget to take the lens cap off!\r\nRain\r\nI'm not talking about wash-you-away torrential downpours, but if you're out with your camera in light rain the lens hood will prevent rain from hitting the front of your lens and messing up your photos.\r\nMore importantly it's essential if you fit a raincoat over your camera and lens, because then only the lens hood will protrude from the cover and your lens will be completely protected from the elements.\r\n\r\nFurther reading:\u00a05 must have camera accessories for 2020\r\n\r\nFinger marks\r\nI can\u2019t count the number of times my lens hoods have saved my lenses from sticky little fingers that suddenly reach out for my lens during a family shoot!\r\nSometimes little ones run up to me during a photo shoot and don't stop until they're really close, then reach for my lens. Finger prints are not a big deal, but I\u2019d have to stop photographing and clean my lens before continuing, which would break the moment.\r\nBumps and scratches\r\nA big deal, and for me the purpose of a lens hood, is when I\u2019ve not been concentrating on what I\u2019m doing and have accidentally bumped my lens into something when photographing.\r\nEven worse is when I\u2019ve let my camera hang from my neck without holding onto it, because I needed to use both hands for something, and have leaned forward. The camera has swung forward and hit something, like maybe a table or a chair. With the lens hood attached, the lens is protected from any potential scratches.\r\nThis makes me sound quite careless, but I\u2019m actually ridiculously careful with my stuff. When shoots get busy these things do sometimes happen, so it's better to be protected.\r\nMany photographers argue that if you drop a lens, with lens hood fitted, the front of the lens would be protected from damage. This is true, but not always, because of course it depends on the quality of the lens you dropped, plus the height from which you dropped it. Whatever the case, it certainly wouldn't hurt to spend a tiny amount on a lens hood to protect your investment.\r\n\r\nFurther reading:\u00a0Expensive lens or expensive camera \u2013 which is better?\r\n\r\nWhen not to use a lens hood\r\nWith all that said you\u2019d think there would never be a time when the lens hood should come off, but there is one.\r\nThe only time a lens hood is not a good idea is when you\u2019re using a flash on your camera, especially with a long lens. The lens gets in the way of the light and you end up with a shadow at the bottom of your image.\r\nTypes of lens hoods\r\nYou\u2019ll see that some there are different types of lens hoods. Some look like tubes and others have wavy sides. The really good reason for different types of lens hoods has nothing to do with personal preference or looking fancy.\r\n1. Petal lens hoods\r\nThese lens hoods have wavy sides and are for the wider angled lenses and zoom lenses. Both my 24 - 70mm lens and my 70 - 200mm lens have a petal lens hoods.\r\nThe reason is that when you use the wider angles, because the sides of the lens hood have been cut away, they don\u2019t appear in shot.\r\n\r\nAbove is my 70-200mm Nikon lens and below my 24-70mm Nikon lens. You can see that the lens hoods differ slightly between lenses. They both have wavy sides, however, and are examples of petal lens hoods.\r\n\r\n2. Cylindrical lens hoods\r\nThese are suited to longer focal length lenses.\r\nThey're a solid tube shape, so the sides aren't wavy, and the front of the lens is well protected from the sun.\r\nYou'd think that if they're that good why not just have cylindrical lens hoods? If you were to use a cylindrical lens hood at a wide angle you\u2019d have black corners on your shots as the lens hood would be in shot.\r\nWhat lens hood should I buy?\r\nSometimes you have to replace or purchase a lens hood separately from a lens.\r\nI don\u2019t know why, but not every manufacturer supplies a lens hood with every lens they sell. They\u2019re essential in my book, so should be supplied with every lens, just like a lens cap is supplied with every lens.\r\nIf you don\u2019t have lens hoods for each of your lenses, I strongly recommend you buy some. It\u2019s not complicated though as there\u2019s only one style of lens hood for each lens. Also, they don\u2019t cost much, but can save you a fortune in damage.\r\nThere are, however, more expensive and cheaper versions. You don\u2019t have to buy the more expensive branded lens hoods. I prefer them as they are guaranteed to fit smoothly, but the cheaper versions are also okay.\r\nJust have a look for lens hoods to buy for your specific lens and then choose either a branded or non branded version. There are many options for each type of lens hood. Just search for a lens hood for your type of lens, e.g. "lens hood for Canon 18 55mm", to see your options.\r\nAs you can see, there's not a lot of difference between branded and unbranded - here's a branded\u00a0lens hood for Nikon 24-70mm lens\u00a0or you can get this unbranded lens hood\u00a0at half the price.\r\n[\/et_pb_text][et_pb_text admin_label="storing a lens hood" _builder_version="3.27.4"]\r\nStoring a lens hood\r\nIt won\u2019t take up much space in your camera bag, because to pack it, just reverse fit it onto your lens. When you take your camera out of your bag, you just take the lens hood off, turn it around, fit it back on and you\u2019re good to go. Nice and easy.\r\n\r\nBoth lenses with lens hoods stored for packing in my camera bag without taking up much extra space.\r\n\r\nLeave a comment\r\nIf you have any questions about the purpose of a lens hood, let us know in the comments.\r\nAlso, we love good news, so if our lens hood tips have helped you to understand what a lens hood is for, share that too.\r\nHas this photography tutorial answered what is the purpose of a lens hood?\r\nShare the learning... pin it, post it.